BASE MAGNETIC H/DUTY
"Starrett 659A Heavy-Duty Magnetic Base Assembly Set, With Upright Post, Snug, Gauge Rod With Clamp, Fine Adjust, Thread Adaptor, Without Case
This holder has a powerful magnetic base that attaches to flat surfaces or on round work up to 5"" in diameter by a form-ground involute vee for accurate seating. It has approximately twice the holding power of our No. 657 magnetic base and has a rotary on/off switch. A post snug with two 3/4"" gripping holes positions the dial indicator at any height and at any vertical angle and allows for 360 degree rotation of the gauge rod. After locking the gauge in place, the final indicator setting is made by an independent fine adjustment at the back end of the gauge rod. The base is furnished with a threaded adaptor, making it possible to use the no. 657 series magnetic base post and attachments. Base and snug have a black wrinkle finish with precision ground contact surfaces. Available with or without starrett AGD dial indicators: inch reading no. 25-131J (0.0005"" graduation) or millimeter reading No. 25-181J (0.01mm graduation). Other mechanical AGD indicators are available on request. Electronic indicators, nos. 2600 and 2700 series, are also available on request. Both the upright post and the gage rod are approximately 9-3/8"" long and 3/4"" in diameter. "
This holder has a powerful magnetic base that attaches to flat surfaces or on round work up to 5"" in diameter by a form-ground involute vee for accurate seating. It has approximately twice the holding power of our No. 657 magnetic base and has a rotary on/off switch. A post snug with two 3/4"" gripping holes positions the dial indicator at any height and at any vertical angle and allows for 360 degree rotation of the gauge rod. After locking the gauge in place, the final indicator setting is made by an independent fine adjustment at the back end of the gauge rod. The base is furnished with a threaded adaptor, making it possible to use the no. 657 series magnetic base post and attachments. Base and snug have a black wrinkle finish with precision ground contact surfaces. Available with or without starrett AGD dial indicators: inch reading no. 25-131J (0.0005"" graduation) or millimeter reading No. 25-181J (0.01mm graduation). Other mechanical AGD indicators are available on request. Electronic indicators, nos. 2600 and 2700 series, are also available on request. Both the upright post and the gage rod are approximately 9-3/8"" long and 3/4"" in diameter. "
In stock
Only 1 left
SKU
STA-659A
TTD $
TTD $3,984.72
"Starrett 659A Heavy-Duty Magnetic Base Assembly Set, With Upright Post, Snug, Gauge Rod With Clamp, Fine Adjust, Thread Adaptor, Without Case
This holder has a powerful magnetic base that attaches to flat surfaces or on round work up to 5"" in diameter by a form-ground involute vee for accurate seating. It has approximately twice the holding power of our No. 657 magnetic base and has a rotary on/off switch. A post snug with two 3/4"" gripping holes positions the dial indicator at any height and at any vertical angle and allows for 360 degree rotation of the gauge rod. After locking the gauge in place, the final indicator setting is made by an independent fine adjustment at the back end of the gauge rod. The base is furnished with a threaded adaptor, making it possible to use the no. 657 series magnetic base post and attachments. Base and snug have a black wrinkle finish with precision ground contact surfaces. Available with or without starrett AGD dial indicators: inch reading no. 25-131J (0.0005"" graduation) or millimeter reading No. 25-181J (0.01mm graduation). Other mechanical AGD indicators are available on request. Electronic indicators, nos. 2600 and 2700 series, are also available on request. Both the upright post and the gage rod are approximately 9-3/8"" long and 3/4"" in diameter. "
This holder has a powerful magnetic base that attaches to flat surfaces or on round work up to 5"" in diameter by a form-ground involute vee for accurate seating. It has approximately twice the holding power of our No. 657 magnetic base and has a rotary on/off switch. A post snug with two 3/4"" gripping holes positions the dial indicator at any height and at any vertical angle and allows for 360 degree rotation of the gauge rod. After locking the gauge in place, the final indicator setting is made by an independent fine adjustment at the back end of the gauge rod. The base is furnished with a threaded adaptor, making it possible to use the no. 657 series magnetic base post and attachments. Base and snug have a black wrinkle finish with precision ground contact surfaces. Available with or without starrett AGD dial indicators: inch reading no. 25-131J (0.0005"" graduation) or millimeter reading No. 25-181J (0.01mm graduation). Other mechanical AGD indicators are available on request. Electronic indicators, nos. 2600 and 2700 series, are also available on request. Both the upright post and the gage rod are approximately 9-3/8"" long and 3/4"" in diameter. "
SKU | STA-659A |
---|---|
Weight | 4.000000 |
Manufacturer | STARRETT |
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Payment Plan:
The items you need are well within your reach. ShopSSLTT has the premium products you want at affordable prices and with our shop now pay later payment plans we make them accessible to all. Lear more on the following links
Payment plan Details : You can now finance your purchases with flexible payment planss clich here to learn how.
Requirements: Before you apply for the plan make sure you have all the required documents, click here to see the list of documents required.
SSL Featured Deals
Great Deals Available
- ROUTER PLUNGE & FIXED BASE 1/4"&1/2"COLLET 14AMP 2.5HP VSPD LCD DISPLAYTTD $ TTD $1,199.00
- DRILL ROTARY HAMMER SDSMAX 2"14#15A, 19J 1510W 310RPM 2250BPM VSPTTD $ TTD $8,399.95
- BRUSHCUTTER 17"BL 36V 2X6.0AH UHANDLE EQUIVALENT TO 30CC 1.3HP ENGINETTD $ TTD $4,129.00