ROUTER /4-3/8 1.25HP6.5A
"Makita RT0700CX2 Makita 1/4"" Router/Trimmer Kit
One motor with 3 different bases: plunge; trimming and bevel
Host of small routing and trimming tasks in the workshop or on site
Motor is fitted with variable speed control; soft start
Can be quickly locked into the required base
Plunge base: 2 solid grip handles; quick and fine height adjuster
Trimming base for single handed use; fitted with bearing guide
Bevel base can tilt and be locked at a required angle
Trimming guide with roller bearing for curved edge work
The machine is also supplied with a 1/4""collet; side fence; 16mm & 10mm template guides; side grip; dust extraction shrouds; 13 and 22mm wrenches and tool bag.
Compact router trimmer that combines one motor with different bases. This machine is great for a host of small routing and trimming tasks in the workshop or on site. The motor is fitted with variable speed control and has soft start. It can be quickly interchanged and locked into the required base. This kit comes complete with 3 bases; trimming; plunge and bevel base.
Plunge base turns the machine into a plunge router with 2 solid grip handles; a height adjuster with fine adjustment and a stepped turret for repetitive depth setting. The side fence fits left or right and has a 130mm reach from centre; however; you may wish to add a wooden sub fence which would reduce this. Dust extraction outlet is also supplied with a 35mm outlet. Easy to control suitable for decorative edge working as well as small mortices and grooves. Trimming base this small 90mm round base turns the machine into a trimmer for single handed use. Use with or without the height adjustable bearing guide for cutters without bearings; rolling on the curve for a fine cut. A 10mm template guide is supplied to fit this and the side fence can also be used for straight work. The dust guard has a 35mm outlet to attach an extractor hose if required. Bevel base a small square 90mm base that can tilt and be locked at a required angle (45?-0?-30?); allows for more scope when profiling and jointing.
The machine is also supplied with a 1/4"" collet and will accept a 3/8"" collet (not supplied); 16mm & 10mm template guides; plunge base side fence; side grip handle (can replace right plunge base handle); 2 dust extraction shrouds; 13 and 22mm wrenches and tool bag.
Technical specifications
Collet Capacity 6mm and 8mm (1/4"")
Input Wattage 710 w
Plunge Capacity (Trimmer) 0 - 40 mm
Plunge Capacity (Plunge) 0 - 35 mm
No Load Speed 10000 - 30000 rpm
Vibration K factor1.5 m/sec?
Vibration: Cutting MDF3.5 m/sec?
Vibration no load2.5 m/sec?
Net weight1.8 kg
Maximum vibration exposure per day Top
All vibration figures quoted are Tri-axial to EN60745 2006
Vibration: 8:00 Hour Vibration: Cutting MDF
Vibration: 8:00 Hour Vibration no load
User benefits
Variable speed control dial.
Includes Tilt (195561-4) & Plunge (195563-0) bases.
Flat top for stability when changing bits.
Soft start feature.
High durability and accuracy obtained by using aluminium for body housing.
Accepts 6mm & 8mm collets; 1/4"" (6.35mm) & 3/8"" (9.53mm) collets.
Shaft lock for easy bit change.
Rocker on/off switch.
Standard equipment
Tilt base
Plunge base
Trimmer guide
Collet cone
Template guide
Dust nozzle
Tool bag"
One motor with 3 different bases: plunge; trimming and bevel
Host of small routing and trimming tasks in the workshop or on site
Motor is fitted with variable speed control; soft start
Can be quickly locked into the required base
Plunge base: 2 solid grip handles; quick and fine height adjuster
Trimming base for single handed use; fitted with bearing guide
Bevel base can tilt and be locked at a required angle
Trimming guide with roller bearing for curved edge work
The machine is also supplied with a 1/4""collet; side fence; 16mm & 10mm template guides; side grip; dust extraction shrouds; 13 and 22mm wrenches and tool bag.
Compact router trimmer that combines one motor with different bases. This machine is great for a host of small routing and trimming tasks in the workshop or on site. The motor is fitted with variable speed control and has soft start. It can be quickly interchanged and locked into the required base. This kit comes complete with 3 bases; trimming; plunge and bevel base.
Plunge base turns the machine into a plunge router with 2 solid grip handles; a height adjuster with fine adjustment and a stepped turret for repetitive depth setting. The side fence fits left or right and has a 130mm reach from centre; however; you may wish to add a wooden sub fence which would reduce this. Dust extraction outlet is also supplied with a 35mm outlet. Easy to control suitable for decorative edge working as well as small mortices and grooves. Trimming base this small 90mm round base turns the machine into a trimmer for single handed use. Use with or without the height adjustable bearing guide for cutters without bearings; rolling on the curve for a fine cut. A 10mm template guide is supplied to fit this and the side fence can also be used for straight work. The dust guard has a 35mm outlet to attach an extractor hose if required. Bevel base a small square 90mm base that can tilt and be locked at a required angle (45?-0?-30?); allows for more scope when profiling and jointing.
The machine is also supplied with a 1/4"" collet and will accept a 3/8"" collet (not supplied); 16mm & 10mm template guides; plunge base side fence; side grip handle (can replace right plunge base handle); 2 dust extraction shrouds; 13 and 22mm wrenches and tool bag.
Technical specifications
Collet Capacity 6mm and 8mm (1/4"")
Input Wattage 710 w
Plunge Capacity (Trimmer) 0 - 40 mm
Plunge Capacity (Plunge) 0 - 35 mm
No Load Speed 10000 - 30000 rpm
Vibration K factor1.5 m/sec?
Vibration: Cutting MDF3.5 m/sec?
Vibration no load2.5 m/sec?
Net weight1.8 kg
Maximum vibration exposure per day Top
All vibration figures quoted are Tri-axial to EN60745 2006
Vibration: 8:00 Hour Vibration: Cutting MDF
Vibration: 8:00 Hour Vibration no load
User benefits
Variable speed control dial.
Includes Tilt (195561-4) & Plunge (195563-0) bases.
Flat top for stability when changing bits.
Soft start feature.
High durability and accuracy obtained by using aluminium for body housing.
Accepts 6mm & 8mm collets; 1/4"" (6.35mm) & 3/8"" (9.53mm) collets.
Shaft lock for easy bit change.
Rocker on/off switch.
Standard equipment
Tilt base
Plunge base
Trimmer guide
Collet cone
Template guide
Dust nozzle
Tool bag"
Out of stock
SKU
MAK-RT0700CX2
TTD $2,154.95
"Makita RT0700CX2 Makita 1/4"" Router/Trimmer Kit
One motor with 3 different bases: plunge; trimming and bevel
Host of small routing and trimming tasks in the workshop or on site
Motor is fitted with variable speed control; soft start
Can be quickly locked into the required base
Plunge base: 2 solid grip handles; quick and fine height adjuster
Trimming base for single handed use; fitted with bearing guide
Bevel base can tilt and be locked at a required angle
Trimming guide with roller bearing for curved edge work
The machine is also supplied with a 1/4""collet; side fence; 16mm & 10mm template guides; side grip; dust extraction shrouds; 13 and 22mm wrenches and tool bag.
Compact router trimmer that combines one motor with different bases. This machine is great for a host of small routing and trimming tasks in the workshop or on site. The motor is fitted with variable speed control and has soft start. It can be quickly interchanged and locked into the required base. This kit comes complete with 3 bases; trimming; plunge and bevel base.
Plunge base turns the machine into a plunge router with 2 solid grip handles; a height adjuster with fine adjustment and a stepped turret for repetitive depth setting. The side fence fits left or right and has a 130mm reach from centre; however; you may wish to add a wooden sub fence which would reduce this. Dust extraction outlet is also supplied with a 35mm outlet. Easy to control suitable for decorative edge working as well as small mortices and grooves. Trimming base this small 90mm round base turns the machine into a trimmer for single handed use. Use with or without the height adjustable bearing guide for cutters without bearings; rolling on the curve for a fine cut. A 10mm template guide is supplied to fit this and the side fence can also be used for straight work. The dust guard has a 35mm outlet to attach an extractor hose if required. Bevel base a small square 90mm base that can tilt and be locked at a required angle (45?-0?-30?); allows for more scope when profiling and jointing.
The machine is also supplied with a 1/4"" collet and will accept a 3/8"" collet (not supplied); 16mm & 10mm template guides; plunge base side fence; side grip handle (can replace right plunge base handle); 2 dust extraction shrouds; 13 and 22mm wrenches and tool bag.
Technical specifications
Collet Capacity 6mm and 8mm (1/4"")
Input Wattage 710 w
Plunge Capacity (Trimmer) 0 - 40 mm
Plunge Capacity (Plunge) 0 - 35 mm
No Load Speed 10000 - 30000 rpm
Vibration K factor1.5 m/sec?
Vibration: Cutting MDF3.5 m/sec?
Vibration no load2.5 m/sec?
Net weight1.8 kg
Maximum vibration exposure per day Top
All vibration figures quoted are Tri-axial to EN60745 2006
Vibration: 8:00 Hour Vibration: Cutting MDF
Vibration: 8:00 Hour Vibration no load
User benefits
Variable speed control dial.
Includes Tilt (195561-4) & Plunge (195563-0) bases.
Flat top for stability when changing bits.
Soft start feature.
High durability and accuracy obtained by using aluminium for body housing.
Accepts 6mm & 8mm collets; 1/4"" (6.35mm) & 3/8"" (9.53mm) collets.
Shaft lock for easy bit change.
Rocker on/off switch.
Standard equipment
Tilt base
Plunge base
Trimmer guide
Collet cone
Template guide
Dust nozzle
Tool bag"
One motor with 3 different bases: plunge; trimming and bevel
Host of small routing and trimming tasks in the workshop or on site
Motor is fitted with variable speed control; soft start
Can be quickly locked into the required base
Plunge base: 2 solid grip handles; quick and fine height adjuster
Trimming base for single handed use; fitted with bearing guide
Bevel base can tilt and be locked at a required angle
Trimming guide with roller bearing for curved edge work
The machine is also supplied with a 1/4""collet; side fence; 16mm & 10mm template guides; side grip; dust extraction shrouds; 13 and 22mm wrenches and tool bag.
Compact router trimmer that combines one motor with different bases. This machine is great for a host of small routing and trimming tasks in the workshop or on site. The motor is fitted with variable speed control and has soft start. It can be quickly interchanged and locked into the required base. This kit comes complete with 3 bases; trimming; plunge and bevel base.
Plunge base turns the machine into a plunge router with 2 solid grip handles; a height adjuster with fine adjustment and a stepped turret for repetitive depth setting. The side fence fits left or right and has a 130mm reach from centre; however; you may wish to add a wooden sub fence which would reduce this. Dust extraction outlet is also supplied with a 35mm outlet. Easy to control suitable for decorative edge working as well as small mortices and grooves. Trimming base this small 90mm round base turns the machine into a trimmer for single handed use. Use with or without the height adjustable bearing guide for cutters without bearings; rolling on the curve for a fine cut. A 10mm template guide is supplied to fit this and the side fence can also be used for straight work. The dust guard has a 35mm outlet to attach an extractor hose if required. Bevel base a small square 90mm base that can tilt and be locked at a required angle (45?-0?-30?); allows for more scope when profiling and jointing.
The machine is also supplied with a 1/4"" collet and will accept a 3/8"" collet (not supplied); 16mm & 10mm template guides; plunge base side fence; side grip handle (can replace right plunge base handle); 2 dust extraction shrouds; 13 and 22mm wrenches and tool bag.
Technical specifications
Collet Capacity 6mm and 8mm (1/4"")
Input Wattage 710 w
Plunge Capacity (Trimmer) 0 - 40 mm
Plunge Capacity (Plunge) 0 - 35 mm
No Load Speed 10000 - 30000 rpm
Vibration K factor1.5 m/sec?
Vibration: Cutting MDF3.5 m/sec?
Vibration no load2.5 m/sec?
Net weight1.8 kg
Maximum vibration exposure per day Top
All vibration figures quoted are Tri-axial to EN60745 2006
Vibration: 8:00 Hour Vibration: Cutting MDF
Vibration: 8:00 Hour Vibration no load
User benefits
Variable speed control dial.
Includes Tilt (195561-4) & Plunge (195563-0) bases.
Flat top for stability when changing bits.
Soft start feature.
High durability and accuracy obtained by using aluminium for body housing.
Accepts 6mm & 8mm collets; 1/4"" (6.35mm) & 3/8"" (9.53mm) collets.
Shaft lock for easy bit change.
Rocker on/off switch.
Standard equipment
Tilt base
Plunge base
Trimmer guide
Collet cone
Template guide
Dust nozzle
Tool bag"
| SKU | MAK-RT0700CX2 |
|---|---|
| Weight | 0.000000 |
| Manufacturer | MAKITA |
Write Your Own Review
Payment Plan:
The items you need are well within your reach. ShopSSLTT has the premium products you want at affordable prices and with our shop now pay later payment plans we make them accessible to all. Lear more on the following links
Payment plan Details : You can now finance your purchases with flexible payment planss clich here to learn how.
Requirements: Before you apply for the plan make sure you have all the required documents, click here to see the list of documents required.
