CYLINDER NIT 10 CU IN ASY
"NITROGEN ACTUATION CYLINDER (P/N 12856)
The 10 in3 N2 cylinder, P/N 12856, supplies nitrogen gas
pressure to the cylinder through the actuation network for the
purpose of opening the agent cylinder valve. This cylinder is
charged to 1800 psig (12410 KPa) at 70¦F (21¦C) and
contains enough nitrogen to actuate up to ten KP 375 or six
KP 600 agent cylinder assemblies at a maximum distance of
100 feet (21.3 meters) to the last control head. Pressure is
retained in the N2 cylinder by a gold plated rupture disc.
Replacement rupture discs are available as P/N 09958. Only
genuine Amerex rupture discs may be used when recharging
nitrogen cylinders. Proper charge pressure is indicated by a
pressure gauge located on the cylinder bottom and protected
by an impact resistant plastic gauge guard. The N2 cylinder is
shipped fully charged from the Amerex factory with a
protective shipping cap installed on the outlet threads. The
cap must be removed at installation but must remain in place
at all other times. (Retain the shipping cap to reuse when recharging the cylinders.) Construction of the N2
cylinder is per DOT 3E. The cylinder is rechargeable by certified Amerex installers and does not require
periodic hydrotesting. The 10 in3 nitrogen cylinder may be used in the MRM or PRM."
The 10 in3 N2 cylinder, P/N 12856, supplies nitrogen gas
pressure to the cylinder through the actuation network for the
purpose of opening the agent cylinder valve. This cylinder is
charged to 1800 psig (12410 KPa) at 70¦F (21¦C) and
contains enough nitrogen to actuate up to ten KP 375 or six
KP 600 agent cylinder assemblies at a maximum distance of
100 feet (21.3 meters) to the last control head. Pressure is
retained in the N2 cylinder by a gold plated rupture disc.
Replacement rupture discs are available as P/N 09958. Only
genuine Amerex rupture discs may be used when recharging
nitrogen cylinders. Proper charge pressure is indicated by a
pressure gauge located on the cylinder bottom and protected
by an impact resistant plastic gauge guard. The N2 cylinder is
shipped fully charged from the Amerex factory with a
protective shipping cap installed on the outlet threads. The
cap must be removed at installation but must remain in place
at all other times. (Retain the shipping cap to reuse when recharging the cylinders.) Construction of the N2
cylinder is per DOT 3E. The cylinder is rechargeable by certified Amerex installers and does not require
periodic hydrotesting. The 10 in3 nitrogen cylinder may be used in the MRM or PRM."
In stock
Only 6 left
SKU
AMX-12856
TTD $1,519.00
"NITROGEN ACTUATION CYLINDER (P/N 12856)
The 10 in3 N2 cylinder, P/N 12856, supplies nitrogen gas
pressure to the cylinder through the actuation network for the
purpose of opening the agent cylinder valve. This cylinder is
charged to 1800 psig (12410 KPa) at 70¦F (21¦C) and
contains enough nitrogen to actuate up to ten KP 375 or six
KP 600 agent cylinder assemblies at a maximum distance of
100 feet (21.3 meters) to the last control head. Pressure is
retained in the N2 cylinder by a gold plated rupture disc.
Replacement rupture discs are available as P/N 09958. Only
genuine Amerex rupture discs may be used when recharging
nitrogen cylinders. Proper charge pressure is indicated by a
pressure gauge located on the cylinder bottom and protected
by an impact resistant plastic gauge guard. The N2 cylinder is
shipped fully charged from the Amerex factory with a
protective shipping cap installed on the outlet threads. The
cap must be removed at installation but must remain in place
at all other times. (Retain the shipping cap to reuse when recharging the cylinders.) Construction of the N2
cylinder is per DOT 3E. The cylinder is rechargeable by certified Amerex installers and does not require
periodic hydrotesting. The 10 in3 nitrogen cylinder may be used in the MRM or PRM."
The 10 in3 N2 cylinder, P/N 12856, supplies nitrogen gas
pressure to the cylinder through the actuation network for the
purpose of opening the agent cylinder valve. This cylinder is
charged to 1800 psig (12410 KPa) at 70¦F (21¦C) and
contains enough nitrogen to actuate up to ten KP 375 or six
KP 600 agent cylinder assemblies at a maximum distance of
100 feet (21.3 meters) to the last control head. Pressure is
retained in the N2 cylinder by a gold plated rupture disc.
Replacement rupture discs are available as P/N 09958. Only
genuine Amerex rupture discs may be used when recharging
nitrogen cylinders. Proper charge pressure is indicated by a
pressure gauge located on the cylinder bottom and protected
by an impact resistant plastic gauge guard. The N2 cylinder is
shipped fully charged from the Amerex factory with a
protective shipping cap installed on the outlet threads. The
cap must be removed at installation but must remain in place
at all other times. (Retain the shipping cap to reuse when recharging the cylinders.) Construction of the N2
cylinder is per DOT 3E. The cylinder is rechargeable by certified Amerex installers and does not require
periodic hydrotesting. The 10 in3 nitrogen cylinder may be used in the MRM or PRM."
| SKU | AMX-12856 |
|---|---|
| Weight | 2.000000 |
| Manufacturer | AMEREX |
Write Your Own Review
Payment Plan:
The items you need are well within your reach. ShopSSLTT has the premium products you want at affordable prices and with our shop now pay later payment plans we make them accessible to all. Lear more on the following links
Payment plan Details : You can now finance your purchases with flexible payment planss clich here to learn how.
Requirements: Before you apply for the plan make sure you have all the required documents, click here to see the list of documents required.
