DRILL 1/2"HAM+DRV 18V 5AH. DHP481-1090# DTD152-1460#

DLX2146T MAKITA 18V LXT Lithium-Ion Brushless Cordless 2-Pc. Combo Kit, DHP481 - 1/2" BRUSHLESS HAMMER DRILL + DTD152 - IMPACT DRIVER 18V, 2 X 5.0AH LI-ION BATTERY DHP481 POWER : BL Brushless Motor delivers 1,090 in.lbs. of Max Torque ERGONOMICS : Compact and ergonomic design at only 8-1/8" long and weighs only 5.9 lbs. CONVENIENCE : 3-stage L.E.D. gauge indicates battery charge level DTD152 POWER : Makita-built 4-pole motor delivers 1,460 in.lbs. of Max Torque SPEED : Variable speed (0-2,900 RPM & 0-3,500 IPM) for a wide range of fastening applications COMPACT : Compact and ergonomic design at only 5-3/8" long DURABILITY : All metal gear housing for increased job site durability PRODUCT DESCRIPTION The Makita DHP481 LXT combi drill is powered by an 18v lithium-ion battery and the brushless motor enables up to twice the run-time of traditional motors. This two-speed drill will run up to 2,100rpm in high gear and 550rpm in low. It will deliver 31,500 impacts per minute in high gear and 8,250 impacts per minute in low gear. The 13mm single sleeve keyless chuck enables 16mm capacity in masonry, 13mm in steel and a massive 76mm in timber. Torque can be adjusted to 21 alternative settings and has a dedicated drilling mode. The DHP481 will generate 60Nm of fastening torque (soft joint) and between 115-125Nm (1090 INCH.LBS) (hard joint), the highest torque yet from the Makita 18v range. There are twin LED job lights with afterglow once the variable speed trigger is released and a new side handle configuration gives light tool control. Coupled with the soft grip ergonomic handle design positive drill-driver capability is assured. It weighs just 2.7kg, and is more compact (20mm shorter) than the previous BHP458 model. Batteries and charger sold separately. The Makita DTD152 18V LXT Lithium-Ion Cordless Impact Driver delivers power and speed in a compact size for a full range of driving and fastening tasks. The DTD152 features a Makita-built 4-pole motor with variable speed (0-2,900 RPM and 0-3,500 IPM) that delivers 1,460 in.lbs. of Max Torque. At only 5-3/8” long and 2.8 pounds (with battery, sold separately), it has a compact and ergonomic design with less weight for reduced operator fatigue, and a rubberized soft grip for increased comfort on the job. The built-in L.E.D. light illuminates the job area for applications in dark spaces and close quarters. PRODUCT VIDEO NOTE : XPH07 IS THE USA MODEL # TO THE DHP481 OFFERED HERE, XDT11 IS THE USA MODEL # TO THE DTD152 OFFERED HERE PRODUCT FEATURES DHP481Z Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge Forward/reverse rotation Single sleeve keyless chuck allows for easy bit installation/removal by one hand Electric brake Twin LED job light with afterglow 2 mechanical gears Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity Variable speed control by trigger Best possible ergonomic handle for drill-driver applications Compact overall length of 205mm XPT - Extreme Protection Technology Higher productivity due to new battery motor and increased speed (2,000 min-1) compared to its predecessor 2 functions, 2 gears, soft torque 60 Nm, 2.6 kilograms Compact and light in weight thanks to the brushless motor. Now 6 mm shorter than its predecessor Adjustable slip coupling is set higher, so that larger screws sink better in wood Equipped with the best possible ergonomic handle for more comfortable working Equipped with two LEDs for screwing and drilling without shadow of the drill bit The improved dust and splash water protection ensures reliable operation, even in bad weather Equipped with DC18RC fast charger as standard, therefore full Lithium-Ion batteries in just 22 minutes Additional available! Battery protector for even higher protection against bad weather and harsh conditions DTD152Z Variable speed (0-2,900 RPM & 0-3,500 IPM) and 1,460 in.lbs. of torque for a wide range of fastening applications 4-pole motor with innovative 4-brush design delivers increased RPM without decreasing torque All metal gear housing for increased job site durability Compact and ergonomic design at only 5-3/8" long Weighs only 2.8 lbs. with battery (battery not included) for reduced operator fatigue Convenient one-touch 1/4" hex chuck for quick bit changes Rubberized soft grip provides increased comfort on the job Built-in L.E.D. light with an independent on/off switch illuminates the work area Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions Makita's proprietary hammer and anvil impact mechanism are manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature (battery and charger not included) Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging (battery and charger not included) Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger (battery and charger not included) Compatible with Makita 18V Lithium-Ion batteries with a Star symbol Specialist in heavy connections (M10 - M16). Compact, fast machine. Maximum 165 Nm strong. Durable machine through protection against overload, overheating and deep discharge of the battery. Well protected against dust and moisture by unique construction. With built-in double lighting, which continues to burn for 10-15 seconds after releasing the switch. This is useful for finding the following confirmation in areas that are not well lit. TECHNICAL SPECIFICATIONS DHP481Z Voltage: 18v Power Output (W): 640 Soft Application Max Torque (Nm): 60 Hard Application Max Torque (Nm): 115-125 , 1090 INCH.LBS Torque Settings: 21 + Drill Brake Type: Electric No. of Gears: 2 LED Job Light: Yes / Twin / After-glow Battery Capacity Indicator: Yes Battery Compatibility: 18v Lithium-Ion (LXT) Rotation: Forward / Reverse Variable Speed Control Trigger: Yes No Load Speed (RPM) High: 0-2100 No Load Speed (RPM) Med: N/A No Load Speed (RPM) Low: 0-550 Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal Chuck Capacity (mm): 13 Screw Capacity: Machine Screw (mm): 6 Screw Capacity: Wood Screw (mm): 10 x 90 Drill Capacity: Concrete (mm): 16 Drill Capacity: Metal (mm): 13 Drill Capacity: Wood (mm): 76 Impact Rate (BPM) High: 0-31500 Impact Rate (BPM) Med: N/A Impact Rate (BPM) Low: 0-8250 Overall Length (mm): 205 Brushless Motor: Yes Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2.5 KG / 5.5 LBS Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.7 KG / 5.94 LBS DTD152Z Hex Shank : 1/4" No Load Speed (variable speed) : 0 - 2,900 RPM Impacts Per Minute (variable speed) : 0 - 3,500 IPM Maximum Torque (in.lbs./N•m) : 1,460 in.lbs./165Nm Battery : 18V LXT Lithium-Ion Overall Length : 5-3/8" Net Weight (with battery) : 2.8 lbs. Speed power selection : 1 Power Type : Cordless Machine voltage 18 V 4-pole motor type Connection / mounting 1/4 "hex Var. speed control (switch) yes Left, right turning yes Built-in lighting yes Metric thread screws (M) 4 - 8 mm Screws with wood thread (length) 22 - 125 mm Type electric motor FD31-10 Soft grip yes Dim. lxwxh 137x79x238 mm Sound pressure level (LpA) 93 dB (A) Sound pressure level (K) 3 dB (A) Weight with BL1815 battery 1.3 kg Weight with BL1815N battery 1.3 kg Weight with BL1830 battery 1.5 kg Weight with BL1840 battery 1.5 kg Confirm vibration ah up to max. 10.5 m / s² Confirm vibration (K) up to max. 1.5 m / s² Battery protection yes Bolt with high tensile strength (M) 5 - 12 mm Electric brake yes Weight with BL1820 battery 1.3 kg Weight with BL1820B battery 1.3 kg Weight with BL1840B battery 1.5 kg Weight with BL1850 battery 1.5 kg Weight with BL1850B battery 1.5 kg Standard bolt (M) 5 - 16 mm SUPPLIED AS STANDARD: 1x Makita DTD152Z 1x Makita DHP481Z 2 x Li-Ion 5.0 Ah batteries 1x Lithium-Ion Fast Charger 1x M-box Suitcase SHIPPING WEIGHT: 8200 GRAMS | 18 LBS