DRILL 1/2+WRN1/2M18 2X3A BLFUEL 2804+2855+48111837

PRE-ORDER NOW

INCLUDES

(1) M18 FUEL™ 1/2 Compact Impact Wrench w/ Pin Detent Bare Tool(2855P-20)

(1) M18 FUEL™ ½” Hammer Drill/Driver (Tool Only) (2804-20)

(1) M18™ REDLITHIUM HIGH OUTPUT™ CP3.0 Battery 2-Pack (2 X 48-11-1835)

(1) Belt Clip

(1) Bit Holder

(1) Side Handle

(1) BAG CONTRACTOR 18"X11X10" (50-55-3560)

(1) Multi-Voltage Charger

PRODUCT DESCRIPTION

2855P-20 (IMPACT WRENCH)

The Milwaukee M18 FUEL 1/2 in. Compact Impact Wrench with Pin Detent is the most compact in its class, delivering users more power, the most access in tight spaces at only 4.9 in. L, and maximum workspace visibility. This cordless impact wrench features a POWERSTATE Brushless motor that generates up to 250 ft./lbs. of fastening and nut-busting torque, providing users with the power required for installation and removal, even in confined spaces. The Milwaukee 1/2 in. impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 20 ft./lbs. of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops.

2804-20 (HAMMER DRILL)

The M18 FUEL™ ½” Hammer Drill is the Industry's Most Powerful Drill by delivering Up to 60% More Power, Up To 1.5” Shorter length and Up To 2X Faster Speed Under Heavy Load. The POWERSTATE™ Brushless motor delivers 1,200 in-lbs of torque and 2,000 RPMs, providing fast drilling through demanding applications. At 6.9” in length, this is the most compact drill in its class, giving better access in tight spaces and reducing fatigue. The REDLINK PLUS™ intelligence ensures maximum performance and protects from overloads, heating and over-discharge. The REDLITHIUM XC5.0™ Battery Pack delivers more work per charge and more work over the life of the pack when compared to competitors. The all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.

PRODUCT FEATURES

2855P-20 (IMPACT WRENCH)

More powerful

Most access in tight spaces

Maximum workspace visibility

Tool features pin detent for locking sockets in place securely, especially while working overhead

4.9 in. L provides most access in tight spaces

POWERSTATE brushless motor delivers up to 250 ft. lbs. of nut-busting torque

Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows

4-mode DRIVE CONTROL provides greater control over output speed and power, includes auto shut-off and bolt-removal mode

Auto shut-off control prevents over tightening and increases productivity by applying no more than 20 ft./lbs. of torque

Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops

Mode 1 RPMs: 0-900, mode 2 RPMs: 0-1,650, mode 3 RPMs: 0-2,400, mode 4 RPMs: 0-2,400

Mode 1 IPMs: 0-1,000, mode 2 IPMs: 0-2,400, mode 3 IPMs: 0-3,500, mode 4 IPMs: 0-3,500

REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating and over-discharge

Works in up to 69kV environments

2804-20 (HAMMER DRILL)

Up to 60% more power: 1,200 in./lbs. of torque

Only 6.9 in. L for access into tight spaces and reduced fatigue

1/2 in. all metal ratcheting chuck

LED on foot of tool for better lighting in dark spaces

POWERSTATE brushless motor: purposely built for the M18 FUEL 1/2 in. hammer drill driver to provide up to 60% More Power than the competitive set

PRODUCT SPECIFICATIONS

2855-20 (IMPACT WRENCH)

Height   7.95"

Length  4.9"

Width    2.56"

Power Source    Cordless

Nut Busting Torque         250 (ft-lbs)

Fastening Torque             250 (ft-lbs)

Anvil Type           1/2" Square w/ Friction Ring

Battery System M18

Tool Weight   3 lbs (Tool Only)

2804-20 (HAMMER DRILL)

Length  6.9"

Tool Warranty   5 Years

Voltage 18V

Power Source    Cordless

RPM      0-550/ 0-2,000

Peak Torque       1200 in-lbs

BPM      32,000

Number of Clutch Settings           14

Chuck Type         1/2" All Metal Ratcheting

Tool Weight   4 lbs. (Tool Only)

Shipping Weight 18  lbs.