DRILL PRESS FL JDP-20MF

"great choice for professionals as well as for home woodworkers, the Jet 354170 JDP-20MF 20-inch floor drill press spins bits up to 3/4 of an inch with 12 speeds from 150 to 4,200 rpm. It's equipped with a built-in work lamp, adjustable tension spindle return spring, and hinged metal belt and pully cover. A drill chuck and key are included, and it's backed by a two-year limited warranty. Jet 354170 The JDP-20MF 20-inch floor drill press (view larger). At a Glance 354170 JDP-20MF 20-Inch Floor Drill Press At a Glance: •1-1/2-horsepower, 12-speed motor (from 150 to 4,200 rpm) •Hinged metal belt and pulley cover for easy access to quick-adjustment motor •Rotating, 45-degree tilting, crank-operated worktable •1/2-inch diameter external positive depth stop with three-nut locking feature •Two-year limited warranty At a Glance Features The Jet 354170's smooth-traveling table raises and lowers at the turn of a crank to exactly where you need it. And angled drilling is easy thanks to the rotating, 45-degree tilting worktable that also features a quick-release clamp. The 1-1/2-horsepower motor can run off either 115-volt outlets (for which it comes prewired) or 230-volt sources, and it provides 12 drill speeds ranging from 150 to 4,200 rpm. To change the speed, just flip open the hinged metal cover, disengage the motor, slip the belt onto the right pulley, and you're back at work in a flash. The 354170 has a 1/2-inch diameter external positive depth stop with three-nut locking feature for quick adjustment. It also offers an adjustable tension spindle return spring, with the spindle supported by high-quality ball bearings. Other features include an on/off switch located on front of the drill press head and a built-in work lamp (bulb not included). What's in the Box One Jet 354170 JDP-20MF drill press (head assembly, table, column and table bracket assembly, base), chuck and key, arbor, drift key, and operating and assembly instructions. Specifications •Motor: 1-1/2 horsepower, 1 phase, 115/230 volt (prewired 115 volt) •Speeds: 12, from 150 rpm to 4,200 rpm •Spindle taper: MT-3 •Quill: 2.44-inch diameter; 4-5/8-inch diameter •Maximum spindle distance to table: 29-1/8 inches •Drilling capacity: 1-inch cast iron; 3/4-inch mild steel •Table size: 18-1/2 inches by 16 inches •Work table weight capacity: 80 pounds •Chuck size: 3/4-inch •Dimensions: 33 inches by 19 inches by 67 inches •Weight: 325 pounds "