DRUM LIFTER MORSE MODEL 86
Below-Hook Drum Lifter with under drum support and Web Strap positive grip around drum. Has NO tilt function. Capacity: 1000 Lb. (454 kg). Specific to model 86...
Model 86 is a safety conscious method to lift a steel, plastic or fiber drum with your crane and hoist
Holds drum UPRIGHT... has NO tilt function
Has under drum support and web strap around drum
Lift various size plastic, steel or fiber drum
22” to 23.5” (55.9 cm to 59.7 cm) diameter
23” to 38” (58.4 cm to 96.5 cm) tall
Insert correct size Diameter Adapter for smaller drum
Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate
All Drum Lifters...
Morse Below-Hook Drum Lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
Rated load markings and unit identification
Minimum design safety factor of 3, based on yield strength, for load bearing structural components
Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
Model 86 is a safety conscious method to lift a steel, plastic or fiber drum with your crane and hoist
Holds drum UPRIGHT... has NO tilt function
Has under drum support and web strap around drum
Lift various size plastic, steel or fiber drum
22” to 23.5” (55.9 cm to 59.7 cm) diameter
23” to 38” (58.4 cm to 96.5 cm) tall
Insert correct size Diameter Adapter for smaller drum
Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate
All Drum Lifters...
Morse Below-Hook Drum Lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
Rated load markings and unit identification
Minimum design safety factor of 3, based on yield strength, for load bearing structural components
Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
In stock
Only 2 left
SKU
AMI-M86
TTD $7,611.75
Below-Hook Drum Lifter with under drum support and Web Strap positive grip around drum. Has NO tilt function. Capacity: 1000 Lb. (454 kg). Specific to model 86...
Model 86 is a safety conscious method to lift a steel, plastic or fiber drum with your crane and hoist
Holds drum UPRIGHT... has NO tilt function
Has under drum support and web strap around drum
Lift various size plastic, steel or fiber drum
22” to 23.5” (55.9 cm to 59.7 cm) diameter
23” to 38” (58.4 cm to 96.5 cm) tall
Insert correct size Diameter Adapter for smaller drum
Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate
All Drum Lifters...
Morse Below-Hook Drum Lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
Rated load markings and unit identification
Minimum design safety factor of 3, based on yield strength, for load bearing structural components
Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
Model 86 is a safety conscious method to lift a steel, plastic or fiber drum with your crane and hoist
Holds drum UPRIGHT... has NO tilt function
Has under drum support and web strap around drum
Lift various size plastic, steel or fiber drum
22” to 23.5” (55.9 cm to 59.7 cm) diameter
23” to 38” (58.4 cm to 96.5 cm) tall
Insert correct size Diameter Adapter for smaller drum
Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate
All Drum Lifters...
Morse Below-Hook Drum Lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
Rated load markings and unit identification
Minimum design safety factor of 3, based on yield strength, for load bearing structural components
Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
| SKU | AMI-M86 |
|---|---|
| Weight | 56.000000 |
Write Your Own Review
Payment Plan:
The items you need are well within your reach. ShopSSLTT has the premium products you want at affordable prices and with our shop now pay later payment plans we make them accessible to all. Lear more on the following links
Payment plan Details : You can now finance your purchases with flexible payment planss clich here to learn how.
Requirements: Before you apply for the plan make sure you have all the required documents, click here to see the list of documents required.
