DETECTOR HEAT 360D FLASH

ISTC-FST-951 DETECTOR HEAT WITH FLASH FIXED INTELLIGENT THERMAL Intelligent (addressable) detectors with point ID capability that enable each detector address to be set with rotary address switches to provide exact detector locations. Our thermal detectors use an innovative thermistor sensing circuit to produce 135°F fixed, rate-of-rise and 190°F high-temperature detection for cost-effective, intelligent property protection. Features & Benefits: • Sleek, low-profile design • Thermal smoke detection • Analog communications • Low standby current • Rotary address switches • Dual LEDs for 360° visibility SPECIFICATIONS: • Operating Voltage Range: 15 to 32 Volts DC Peak • Operating Current @ 24 VDC: 200 uA (one communication every 5 seconds with green LED blink on communication) • Maximum Alarm Current: 2 mA @ 24 VDC (one communication every 5 seconds with red LED solid on) • Maximum Current: 4.5 mA @ 24 VDC (one communication every 5 seconds with amber LED solid on) • Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing • Installation Temperature: Set for fixed-temperature or rate-of-rise (ROR): –4°F to 100°F (–20°C to 38°C) Set for high-heat: –4°F to 150°F (–20°C to 66°C) • Fixed Temperature Rating: 135°F (57°C) • High Heat Temperature Rating: 190°F (88°C) • Rate-of Rise Detection: Responds to greater than 15°F/minute or 135°F (8.3°C/minute or 57°C) • Height: 2.0? (51 mm) installed in B300-6 Base • Diameter: 6.2? (156 mm) installed in B300-6 Base • Weight: 3.4 oz. (95 g)