HARNESS CONTRACTOR H4

Use - Element part of a personal fall protection system. Has a dorsal D-ring for fall restriction and detention. Fall detention (Dorsal D-Ring) The full-body is used as a component of a personal fall detention system. For fall detention applications, use the D-ring or the attachment element on the back between the shoulder blades. The D-ring must be located within the area shown in figure 1, otherwise the size or harness adjustments must be checked. After a free fall, the resulting position of the body will be vertical with a slight inclination towards the front, the user will feel a slight pressure on the lower part of the chest. This attachment point can be used to restrict displacement or rescue. The system must include a full-body harness and a subsystem (lanyard with shock absorber). The maximum fall detention force must not exceed 8 Kn (1800 lb). It must not allow the angle at rest after a possible fall exceeds 30 ° inclination respect to the vertical line. He full-body harness is used as a component of a restriction system to prevent the user from reaching the free fall zone. A fall restriction system must include a full-body harness and a lanyard or a restriction line. Features • “V” style harness. • Manufactured with 43 mm webbing (wide). • Webbing 100% polyester with high static strength and abrasion • Hardgoods with high resistance to breaking and corrosion. • Connectors and adjustment buckles at pelvic and pectoral areas, for adjustment to the user's size. Minimum breaking strength 15 Kn (3372 lb) in accordance with ANSI Z359.12-2009. • Stitch patterns made of high resistance polyester thread and different color than webbing for easy identification and inspection. • Designed to provide comfort to the user: connectors and adjustment buckles, lanyard parking and back strap. • Dorsal pad to ensure that the dorsal D-ring stays in place and the straps cross at the back. • Label cover to keep information and traceability. • Physical weight 1.07 kg. • Approved harness, element by element, together in dynamic test (simulating head and feet fall) and static in accordance to the standard requirements. All the parts that make up the harness and the assembly are evaluated in our laboratory, accredited under ISO 17025 standard, for tests of harnesses with ANSI / ASSE Z359.11-2014.