SAW TABLE 15AMP 10"
The SKIL TS6307-00 10 IN. Jobsite Table Saw has a 25-1/2 IN. (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup. This large coated cast aluminum tabletop saw comes equipped with a 10 IN., 24-tooth carbide blade. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of power outages.
What's Included: Table saw w/ integrated folding stand, blade guard, push stick, miter gauge, anti-kickback pawl, dust port elbow, 2pcs wrench, riving knife, rip fence, 24T blade, drive knob with washer and hex screw.Features
RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
-2-47° BEVEL CAPACITY – Cuts between two positive stops at 0 and 45 degrees with quick release lever
DUST PORT ELBOW – Redirects dust to a container for easy cleanup
Specs
Blade Arbor Hole Diameter: 5/8 IN.
Blade Diameter: 10 IN.
Max. Cutting Depth - 0° Bevel: 3.5 IN.
Max. Cutting Depth - 45° Bevel: 2.5 IN.
Max. RIP of Left of Blade: 14 IN.
Max. RIP of Right of Blade: 25.5 IN.
Max. Width of Dado: 5/8 IN.
Max. bevel angle (°): -2°~47°
No Load Speed: 4600 RPM
Teeth of Blade: 24T
Tool Current Rating: 15 Amps
Table Width: 24 IN.
Table Length: 25 IN.
Table height (folded): 14-1/4 IN.
Table Height (unfolded): 32 IN.
In stock
Only 12 left
SKU
SKIL-TS6307-00
TTD $2,899.00
The SKIL TS6307-00 10 IN. Jobsite Table Saw has a 25-1/2 IN. (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup. This large coated cast aluminum tabletop saw comes equipped with a 10 IN., 24-tooth carbide blade. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of power outages.
What's Included: Table saw w/ integrated folding stand, blade guard, push stick, miter gauge, anti-kickback pawl, dust port elbow, 2pcs wrench, riving knife, rip fence, 24T blade, drive knob with washer and hex screw.Features
RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
-2-47° BEVEL CAPACITY – Cuts between two positive stops at 0 and 45 degrees with quick release lever
DUST PORT ELBOW – Redirects dust to a container for easy cleanup
Specs
Blade Arbor Hole Diameter: 5/8 IN.
Blade Diameter: 10 IN.
Max. Cutting Depth - 0° Bevel: 3.5 IN.
Max. Cutting Depth - 45° Bevel: 2.5 IN.
Max. RIP of Left of Blade: 14 IN.
Max. RIP of Right of Blade: 25.5 IN.
Max. Width of Dado: 5/8 IN.
Max. bevel angle (°): -2°~47°
No Load Speed: 4600 RPM
Teeth of Blade: 24T
Tool Current Rating: 15 Amps
Table Width: 24 IN.
Table Length: 25 IN.
Table height (folded): 14-1/4 IN.
Table Height (unfolded): 32 IN.
| SKU | SKIL-TS6307-00 |
|---|---|
| Weight | 51.000000 |
| Manufacturer | SKIL |
Write Your Own Review
Payment Plan:
The items you need are well within your reach. ShopSSLTT has the premium products you want at affordable prices and with our shop now pay later payment plans we make them accessible to all. Lear more on the following links
Payment plan Details : You can now finance your purchases with flexible payment planss clich here to learn how.
Requirements: Before you apply for the plan make sure you have all the required documents, click here to see the list of documents required.
