STAPLES HEAVY DUTY 3/8"

PRODUCT DESCRIPTION:

The Stanley TRA706-5C is a heavy-duty narrow crown staple pack from Stanley’s TRA700 series. These are 24-gauge steel staples with a chisel point, designed for use in heavy stapling tasks - e.g. insulation, carpet underlay, roofing felt, etc. Typically sold in large quantities so suited for high-volume work or keeping a full stock for job-site use.

COMPATIBILITY:

Fits Stanley PHT150C, TR100, TR200, TRE500, TR100HL, and competitor staple guns that take T50 / T55 / Arrow T-50 etc.

ADDITIONAL FEATURES:

Always ensure the staple gun is rated to accept these staples (narrow crown, the correct leg length). Using the wrong ones may jam or damage the tool.

For outdoor or moisture-exposed use, use galvanized finish or other rust-resistant material; plain steel to be used indoors or in dry conditions.

Clean staple delivery path in the gun; dull or dirty chisel points (or deformed ones) can reduce effectiveness and increase effort required.

Proper alignment into the material helps avoid bend or mis-fire; place gun firmly against surface before squeezing.

Store in dry, sealed containers to avoid rust or moisture deterioration.

TECHNICAL SPECIFICATIONS:

Brand: STANLEY

Item Model Number: TRA706-5C

Product Type: Heavy Duty Staples

Crown Width: 27/64"

Leg Length: 3/8"

Material: Steel

Color: Sliver

Quantity: 5,000

Finish: Brushed

Wire Gauge: 25 GA

Point Type: Chisel Point

Crown Type: Narrow crown

Shipping Weight: 1.54 lb