TAPE 1 X 60' ANTI-SLIP
PRODUCT FEATURES
Slip resistant, mineral-coated photoluminescent tape that absorbs and stores energy from artificial or natural light and when tape is charged it becomes immediately visible in the event of a blackout.
No Skidding® Glow-in-the-Dark Anti Slip Safety Tape is ideal for stairs, ramps, landings, emergency exits and other potentially slick surfaces that are part of your low-level emergency egress system.
The initial phase consists of a strong immediate glow followed by an accelerated decrease in the initial brilliance thereafter.
Non radioactive abrasive texture provides safe, anti-slip surface for stairs.
Easily affixes to most surfaces and has an excellent peel-and-stick adhesive backing that facilitates low-cost, easy installation.
Can help to prevent costly slip and fall accidents during blackout conditions.
Exceeds OSHA standards for anti-slip protection on hazardous surfaces.
Meets: DIN 67510, ASTM 2072, ISO 15370, MEA# 235-05-M.
Certified High Traction by NFSI
Slip resistant, mineral-coated photoluminescent tape that absorbs and stores energy from artificial or natural light and when tape is charged it becomes immediately visible in the event of a blackout.
No Skidding® Glow-in-the-Dark Anti Slip Safety Tape is ideal for stairs, ramps, landings, emergency exits and other potentially slick surfaces that are part of your low-level emergency egress system.
The initial phase consists of a strong immediate glow followed by an accelerated decrease in the initial brilliance thereafter.
Non radioactive abrasive texture provides safe, anti-slip surface for stairs.
Easily affixes to most surfaces and has an excellent peel-and-stick adhesive backing that facilitates low-cost, easy installation.
Can help to prevent costly slip and fall accidents during blackout conditions.
Exceeds OSHA standards for anti-slip protection on hazardous surfaces.
Meets: DIN 67510, ASTM 2072, ISO 15370, MEA# 235-05-M.
Certified High Traction by NFSI
In stock
Only 4 left
SKU
NSK-NS4201PH
TTD $472.49
INCLUDES
(1) Photoluminescent Glow-In-The-Dark Anti-Slip Grit Tape - NS4202PH Series
PRODUCT DESCRIPTION
No Skidding® Anti Slip Photoluminescent Grit Tape NS4300PH is a safety grade photoluminescent non-skid grit tape
coated with an aggressive pressure sensitive adhesive. It has been designed to exceed requirements for OSHA and other
safety standards.
APPLICATIONS
No Skidding® Anti Slip Photolunminescent Grit Tape NS4300PH is designed for indoor safety applications such as egress
markings in building, marine, rail, and military applications.
TECHNICAL SPECIFICATIONS
PHYSICAL PROPERTIES TEST METHODS TYPICAL RESULTS
Thickness: PSTC – 133
- Substrate: 0.018 inch (0.457 mm)
- Pressure Sensitive adhesive 0.002 inch (0.051 mm)
- Release Liner: 0.007 inch (0.178 mm)
Peel Adhesion To: PSTC – 101
- Stainless Steel: 15 minute dwell: 55 oz/in (66 N/100 mm)
24 hour dwell: 75 oz/in (82 N/100 mm)
- Powder Coated surfaces: 15 minute dwell: 40 oz/in (44 N/100 mm)
24 hour dwell: 55 oz/in (60 N/100 mm)
- Polyethylene: 15 minute dwell: 20 oz/in (22 N/100 mm)
24 hour dwell: 25 oz/in (27 N/100 mm)
Shear Adhesion To: PSTC – 107
- Stainless Steel: ½” x ½” x 1000g: <5 Hours
Tack: PSTC – 6
Rolling Ball Tack: <5 inches
Coefficient of Friction: ASTM D1894
(Kinetic) : - Dry Rubber: 0.9
- Wet Rubber: 1.0
- Dry Leather: 0.3
- Wet Leather: 1.0
Service Temperature
- High: 14 days at 220ºF: No visible effects, moderate
shrinkage and high elasticity.
- Low: 14 days at -20ºF: No Visible Effect
CHEMICAL PROPERTIES REAGENT RECOMMENDATIONS
Solvent Resistance Water Recommended
(Product laminated to stainless 10% Salt Water Recommended
steel panel and allowed to Bleach Recommended
condition for 24 hrs at room Trichloroethylene Not Recommended
temperature before testing. 25% Sulfuric Acid Intermittent Contact Only
Sample was covered with reagent 1% Sodium Hydroxide Recommended
to the point that edges of product Unleaded Gasoline Recommended
are also exposed to the reagent. Diesel Fuel Recommended
This product is exposed to reagent Hydraulic Fluid Recommended
for 1 hour at room temperature 50% Antifreeze in waterRecommended
then reagent is removed and MEK Not Recommended
product is immediately tested for Mineral Spirits Recommended
scrape resistances, delaminating 99% IPA Recommended
and other visual effects.)
(1) Photoluminescent Glow-In-The-Dark Anti-Slip Grit Tape - NS4202PH Series
PRODUCT DESCRIPTION
No Skidding® Anti Slip Photoluminescent Grit Tape NS4300PH is a safety grade photoluminescent non-skid grit tape
coated with an aggressive pressure sensitive adhesive. It has been designed to exceed requirements for OSHA and other
safety standards.
APPLICATIONS
No Skidding® Anti Slip Photolunminescent Grit Tape NS4300PH is designed for indoor safety applications such as egress
markings in building, marine, rail, and military applications.
TECHNICAL SPECIFICATIONS
PHYSICAL PROPERTIES TEST METHODS TYPICAL RESULTS
Thickness: PSTC – 133
- Substrate: 0.018 inch (0.457 mm)
- Pressure Sensitive adhesive 0.002 inch (0.051 mm)
- Release Liner: 0.007 inch (0.178 mm)
Peel Adhesion To: PSTC – 101
- Stainless Steel: 15 minute dwell: 55 oz/in (66 N/100 mm)
24 hour dwell: 75 oz/in (82 N/100 mm)
- Powder Coated surfaces: 15 minute dwell: 40 oz/in (44 N/100 mm)
24 hour dwell: 55 oz/in (60 N/100 mm)
- Polyethylene: 15 minute dwell: 20 oz/in (22 N/100 mm)
24 hour dwell: 25 oz/in (27 N/100 mm)
Shear Adhesion To: PSTC – 107
- Stainless Steel: ½” x ½” x 1000g: <5 Hours
Tack: PSTC – 6
Rolling Ball Tack: <5 inches
Coefficient of Friction: ASTM D1894
(Kinetic) : - Dry Rubber: 0.9
- Wet Rubber: 1.0
- Dry Leather: 0.3
- Wet Leather: 1.0
Service Temperature
- High: 14 days at 220ºF: No visible effects, moderate
shrinkage and high elasticity.
- Low: 14 days at -20ºF: No Visible Effect
CHEMICAL PROPERTIES REAGENT RECOMMENDATIONS
Solvent Resistance Water Recommended
(Product laminated to stainless 10% Salt Water Recommended
steel panel and allowed to Bleach Recommended
condition for 24 hrs at room Trichloroethylene Not Recommended
temperature before testing. 25% Sulfuric Acid Intermittent Contact Only
Sample was covered with reagent 1% Sodium Hydroxide Recommended
to the point that edges of product Unleaded Gasoline Recommended
are also exposed to the reagent. Diesel Fuel Recommended
This product is exposed to reagent Hydraulic Fluid Recommended
for 1 hour at room temperature 50% Antifreeze in waterRecommended
then reagent is removed and MEK Not Recommended
product is immediately tested for Mineral Spirits Recommended
scrape resistances, delaminating 99% IPA Recommended
and other visual effects.)
| SKU | NSK-NS4201PH |
|---|---|
| Weight | 1.000000 |
| Manufacturer | NO SKIDDING FLOOR SAFETY |
Write Your Own Review
Payment Plan:
The items you need are well within your reach. ShopSSLTT has the premium products you want at affordable prices and with our shop now pay later payment plans we make them accessible to all. Lear more on the following links
Payment plan Details : You can now finance your purchases with flexible payment planss clich here to learn how.
Requirements: Before you apply for the plan make sure you have all the required documents, click here to see the list of documents required.
