FABRICATOR 130 115V W/GUN
"The Fabricator 130 is a single phase 115 VAC input wire welder with Constant Voltage (CV) output characteristics designed for MIG (GMAW) and Flux Cored (FCAW) welding applications. With an output range of 30 to 130 Amps, the Fabricator 130 allows you to weld materials down to 26 gauge and materials up to 3/16.
The Fabricator 130 features a quick disconnect fitting gun allowing the operator to setup out-of-the-box very easily and quickly and is a timesaving and convenient feature when removing the torch to clean or when replacing the liner. Other features include a feeder drive system which has a rugged nonconductive feedhead, a low noise constant speed drive motor, an easily adjustable idle roll pressure arm and one feedroll which runs mild and stainless wire.
This unit comes set up for .023 diameter solid wire and the feed roll also contains a groove for .030/.035 wire. Optional kits are also available to convert the gun and feed system to use .030, .035 and .045 flux cored and self-shielding wire (mild steel and stainless steel) and .035 aluminum wire.
Designed for welding with wires
Mild Steel and Stainless Steel:
Output range of 30 to 130 amps to weld:
Materials down to 26 gauge ( 0.55mm ).
Materials up to 3/16"" ( 5mm ).
Plugs into Standard 115 VAC, Duplex Receptacle ( 20 amps ).
Rugged Slim Line TWECO Welding Gun.
Low Voltage 24 VAC Gun Trigger Circuit.
( Set-up for .035"" hard wire ). 90 A / 18.5 VDC @20% 30-130 amps H: 13.5"" ( 343 mm )
"
The Fabricator 130 features a quick disconnect fitting gun allowing the operator to setup out-of-the-box very easily and quickly and is a timesaving and convenient feature when removing the torch to clean or when replacing the liner. Other features include a feeder drive system which has a rugged nonconductive feedhead, a low noise constant speed drive motor, an easily adjustable idle roll pressure arm and one feedroll which runs mild and stainless wire.
This unit comes set up for .023 diameter solid wire and the feed roll also contains a groove for .030/.035 wire. Optional kits are also available to convert the gun and feed system to use .030, .035 and .045 flux cored and self-shielding wire (mild steel and stainless steel) and .035 aluminum wire.
Designed for welding with wires
Mild Steel and Stainless Steel:
Output range of 30 to 130 amps to weld:
Materials down to 26 gauge ( 0.55mm ).
Materials up to 3/16"" ( 5mm ).
Plugs into Standard 115 VAC, Duplex Receptacle ( 20 amps ).
Rugged Slim Line TWECO Welding Gun.
Low Voltage 24 VAC Gun Trigger Circuit.
( Set-up for .035"" hard wire ). 90 A / 18.5 VDC @20% 30-130 amps H: 13.5"" ( 343 mm )
"
Out of stock
SKU
TWCO-100038A001
TTD4,667.63
"The Fabricator 130 is a single phase 115 VAC input wire welder with Constant Voltage (CV) output characteristics designed for MIG (GMAW) and Flux Cored (FCAW) welding applications. With an output range of 30 to 130 Amps, the Fabricator 130 allows you to weld materials down to 26 gauge and materials up to 3/16.
The Fabricator 130 features a quick disconnect fitting gun allowing the operator to setup out-of-the-box very easily and quickly and is a timesaving and convenient feature when removing the torch to clean or when replacing the liner. Other features include a feeder drive system which has a rugged nonconductive feedhead, a low noise constant speed drive motor, an easily adjustable idle roll pressure arm and one feedroll which runs mild and stainless wire.
This unit comes set up for .023 diameter solid wire and the feed roll also contains a groove for .030/.035 wire. Optional kits are also available to convert the gun and feed system to use .030, .035 and .045 flux cored and self-shielding wire (mild steel and stainless steel) and .035 aluminum wire.
Designed for welding with wires
Mild Steel and Stainless Steel:
Output range of 30 to 130 amps to weld:
Materials down to 26 gauge ( 0.55mm ).
Materials up to 3/16"" ( 5mm ).
Plugs into Standard 115 VAC, Duplex Receptacle ( 20 amps ).
Rugged Slim Line TWECO Welding Gun.
Low Voltage 24 VAC Gun Trigger Circuit.
( Set-up for .035"" hard wire ). 90 A / 18.5 VDC @20% 30-130 amps H: 13.5"" ( 343 mm )
"
The Fabricator 130 features a quick disconnect fitting gun allowing the operator to setup out-of-the-box very easily and quickly and is a timesaving and convenient feature when removing the torch to clean or when replacing the liner. Other features include a feeder drive system which has a rugged nonconductive feedhead, a low noise constant speed drive motor, an easily adjustable idle roll pressure arm and one feedroll which runs mild and stainless wire.
This unit comes set up for .023 diameter solid wire and the feed roll also contains a groove for .030/.035 wire. Optional kits are also available to convert the gun and feed system to use .030, .035 and .045 flux cored and self-shielding wire (mild steel and stainless steel) and .035 aluminum wire.
Designed for welding with wires
Mild Steel and Stainless Steel:
Output range of 30 to 130 amps to weld:
Materials down to 26 gauge ( 0.55mm ).
Materials up to 3/16"" ( 5mm ).
Plugs into Standard 115 VAC, Duplex Receptacle ( 20 amps ).
Rugged Slim Line TWECO Welding Gun.
Low Voltage 24 VAC Gun Trigger Circuit.
( Set-up for .035"" hard wire ). 90 A / 18.5 VDC @20% 30-130 amps H: 13.5"" ( 343 mm )
"
| SKU | TWCO-100038A001 |
|---|---|
| Weight | 0.000000 |
Write Your Own Review
Payment Plan:
The items you need are well within your reach. ShopSSLTT has the premium products you want at affordable prices and with our shop now pay later payment plans we make them accessible to all. Lear more on the following links
Payment plan Details : You can now finance your purchases with flexible payment plans. Click here to learn how.
Requirements: Before you apply for the plan make sure you have all the required documents, click here to see the list of documents required.
