HOLDER ELECTRODE 500AMP WELDPRO
PRODUCT FEATURES
1. LENCO's durable tip insulators are molded from a high impact/high temperature fiberglass compound.
2. The upper lever is fully insulated. The low profile "AF" Series design fits your hand comfortably while the "HT" Series allows greater hand clearance.
3. LENCO's powerful spring holds the electrode securely in place and prevents electrode slippage. The spring is protected by a Lexan cup insulator.
1. LENCO's durable tip insulators are molded from a high impact/high temperature fiberglass compound.
2. The upper lever is fully insulated. The low profile "AF" Series design fits your hand comfortably while the "HT" Series allows greater hand clearance.
3. LENCO's powerful spring holds the electrode securely in place and prevents electrode slippage. The spring is protected by a Lexan cup insulator.
In stock
Only 35 left
SKU
WP-AF-50
TTD $149.00
INCLUDES
(1) Lenco AF-50 500 Amp Welding Electrode Holder 01060
PRODUCT DESCRIPTION
LENCO electrode holders are designed to fit comfortably in the welder's hand. Each design allows the LENCO electrode holder to fit a welder's hand like a glove and provide superior electrode control.
Guidelines on Choosing The Right Size:
The choice of an electrode holder that will be lightweight, run cool, and at the least cost can be determined first by the maximum rod used and
second, by the maximum amperage setting used. LENCO holder numbers indicate the amperage capacity. For example, an AF-2 holder has a
maximum amperage capacity of 250 amps. Match the holder to the rod and amperage used for greatest efficiency.
1. LENCO's durable tip insulators are molded from a high impact/high temperature fiberglass compound.
2. The upper lever is fully insulated. The low profile "AF" Series design fits your hand comfortably while the "HT" Series allows greater hand clearance.
3. LENCO's powerful spring holds the electrode securely in place and prevents electrode slippage. The spring is protected by a Lexan cup insulator.
4. LENCO's specially designed oval-point screw makes it easy to install our holder on a cable. Just strip off the appropriate length of cable insulation and insert it into the holder body, then tighten down the large oval-point screw with an allen wrench. This makes an excellent connection. As a safety precaution, the handle retention screw is upset to prevent removal.
Material Construction
AF/HT-2, 25, 3, 35 and 50 holder handles are molded from a durable glass filled nylon material with excellent heat and impact resistance.
LENCO electrode holders (upper and lower tongs) are made from a high copper alloy for maximum conductivity and strength. The top and bottom tip insulators are a molded fiberglass compound and will withstand intensive heat and impact. Parts for all models are replaceable. The oval-point screw cable connection is standard on all models.
TECHNICAL SPECIFICATIONS
Model: AF-50
Item Code: 01060
Amp Capacity: 450 - 500
Cable Capacity: 4/0 (95 mm²)
Electrodes Up To: 3/8" (9.53 mm)
Length: 10½" (267 mm)
Weight: 1.94lbs
Light Duty: Heavy Duty
Shipping Weight: 2lbs
(1) Lenco AF-50 500 Amp Welding Electrode Holder 01060
PRODUCT DESCRIPTION
LENCO electrode holders are designed to fit comfortably in the welder's hand. Each design allows the LENCO electrode holder to fit a welder's hand like a glove and provide superior electrode control.
Guidelines on Choosing The Right Size:
The choice of an electrode holder that will be lightweight, run cool, and at the least cost can be determined first by the maximum rod used and
second, by the maximum amperage setting used. LENCO holder numbers indicate the amperage capacity. For example, an AF-2 holder has a
maximum amperage capacity of 250 amps. Match the holder to the rod and amperage used for greatest efficiency.
1. LENCO's durable tip insulators are molded from a high impact/high temperature fiberglass compound.
2. The upper lever is fully insulated. The low profile "AF" Series design fits your hand comfortably while the "HT" Series allows greater hand clearance.
3. LENCO's powerful spring holds the electrode securely in place and prevents electrode slippage. The spring is protected by a Lexan cup insulator.
4. LENCO's specially designed oval-point screw makes it easy to install our holder on a cable. Just strip off the appropriate length of cable insulation and insert it into the holder body, then tighten down the large oval-point screw with an allen wrench. This makes an excellent connection. As a safety precaution, the handle retention screw is upset to prevent removal.
Material Construction
AF/HT-2, 25, 3, 35 and 50 holder handles are molded from a durable glass filled nylon material with excellent heat and impact resistance.
LENCO electrode holders (upper and lower tongs) are made from a high copper alloy for maximum conductivity and strength. The top and bottom tip insulators are a molded fiberglass compound and will withstand intensive heat and impact. Parts for all models are replaceable. The oval-point screw cable connection is standard on all models.
TECHNICAL SPECIFICATIONS
Model: AF-50
Item Code: 01060
Amp Capacity: 450 - 500
Cable Capacity: 4/0 (95 mm²)
Electrodes Up To: 3/8" (9.53 mm)
Length: 10½" (267 mm)
Weight: 1.94lbs
Light Duty: Heavy Duty
Shipping Weight: 2lbs
| SKU | WP-AF-50 |
|---|---|
| Weight | 2.000000 |
| Manufacturer | WELDPRO |
Write Your Own Review
Payment Plan:
The items you need are well within your reach. ShopSSLTT has the premium products you want at affordable prices and with our shop now pay later payment plans we make them accessible to all. Lear more on the following links
Payment plan Details : You can now finance your purchases with flexible payment planss clich here to learn how.
Requirements: Before you apply for the plan make sure you have all the required documents, click here to see the list of documents required.
