WATERPROOFER EXTREME WHT DRYLOK-28613
PRODUCT FEATURES:
A versatile masonry waterproofer that can be applied interior, exterior, above or below grade. Guaranteed to stop water up to 15 psi and resists cat 4 (140+ mph) hurricane winds. Resists mildew on the dry paint film.
Coats: Minimum 2 coats
Clean up: Soap and Water
Coverage: 75?–?100 square feet per gallon
Dry Time: 45 minutes to touch, 2?–?3 hours to dry, 2 hours to recoat
Warranty: Fully transferable 15 Year Warranty
Bright white flat, smooth
Latex base
Semi-Impermeable coating - keeps water and vapor out (<1 perm rating)
Can be top coated after 24 hours
Tintable
Application by brush, roller, or sprayer
Reduces radon gas penetration
A versatile masonry waterproofer that can be applied interior, exterior, above or below grade. Guaranteed to stop water up to 15 psi and resists cat 4 (140+ mph) hurricane winds. Resists mildew on the dry paint film.
Coats: Minimum 2 coats
Clean up: Soap and Water
Coverage: 75?–?100 square feet per gallon
Dry Time: 45 minutes to touch, 2?–?3 hours to dry, 2 hours to recoat
Warranty: Fully transferable 15 Year Warranty
Bright white flat, smooth
Latex base
Semi-Impermeable coating - keeps water and vapor out (<1 perm rating)
Can be top coated after 24 hours
Tintable
Application by brush, roller, or sprayer
Reduces radon gas penetration
In stock
Only 10 left
SKU
DRYLOK-28613
TTD499.01
PRODUCT DESCRIPTION:
DRYLOK® is ideal for interior/exterior, above/below grade masonry including cinder and concrete block, stucco, brick, and bare concrete swimming pools. Features Flexible Encapsulated Polymers for a beautiful, smooth waterproof finish. Specifically formulated to resist mildew growth on the dry paint film, with the incorporation of a biocide. Tested to ASTM D-7088 Resistance to Hydrostatic Pressure and ASTM D-6904
Resistance to Wind-Driven Rain. Stops 15 PSI, greater than a wall of water 33 feet (10 meters) high! Fully transferable 15 year warranty.
• Bright white, smooth finish
• Resists mildew growth on the dry paint film
• Resists 15 PSI, equivalent to a wall of water 33 ft. high
• Category 4-resists 140 MPH wind-driven rain
• Fully transferable 15 year warranty
• Guaranteed to stop water, even under pressure
• Features flexible encapsulated polymers
• Tintable
TECHNICAL SPECIFICATIONS:
Composition: Latex Base
Sheen: N/A
% Weight Solids: 67 ± 2
Density (Lbs./us Gal.): 10.13 ± 0.2
Viscosity: 120-130 Ku @ 77ºF
pH: 9.0-10.0
Color: White - ready mixed formula | 1 ready mixed color
Dry Time: 2-3 hours
To touch: 45 minutes
To recoat: 2 hours
Top coat with latex paint: 24 hours
Note: Maximum cure and dry time will be prolonged when slightly humid and damp, cool conditions prevail.
Note: When painting the inside of concrete nonpotable watertanks, allow to dry at least 1 week before putting into service.
Coverage: 1st Coat: 75 sq. ft./gal. 2nd Coat: 75–100 sq. ft./gal.
Shelf Life: 5 years after unopened container
Freeze/Thaw: Three cycles
Shipping Weight: 10 lb.
DRYLOK® is ideal for interior/exterior, above/below grade masonry including cinder and concrete block, stucco, brick, and bare concrete swimming pools. Features Flexible Encapsulated Polymers for a beautiful, smooth waterproof finish. Specifically formulated to resist mildew growth on the dry paint film, with the incorporation of a biocide. Tested to ASTM D-7088 Resistance to Hydrostatic Pressure and ASTM D-6904
Resistance to Wind-Driven Rain. Stops 15 PSI, greater than a wall of water 33 feet (10 meters) high! Fully transferable 15 year warranty.
• Bright white, smooth finish
• Resists mildew growth on the dry paint film
• Resists 15 PSI, equivalent to a wall of water 33 ft. high
• Category 4-resists 140 MPH wind-driven rain
• Fully transferable 15 year warranty
• Guaranteed to stop water, even under pressure
• Features flexible encapsulated polymers
• Tintable
TECHNICAL SPECIFICATIONS:
Composition: Latex Base
Sheen: N/A
% Weight Solids: 67 ± 2
Density (Lbs./us Gal.): 10.13 ± 0.2
Viscosity: 120-130 Ku @ 77ºF
pH: 9.0-10.0
Color: White - ready mixed formula | 1 ready mixed color
Dry Time: 2-3 hours
To touch: 45 minutes
To recoat: 2 hours
Top coat with latex paint: 24 hours
Note: Maximum cure and dry time will be prolonged when slightly humid and damp, cool conditions prevail.
Note: When painting the inside of concrete nonpotable watertanks, allow to dry at least 1 week before putting into service.
Coverage: 1st Coat: 75 sq. ft./gal. 2nd Coat: 75–100 sq. ft./gal.
Shelf Life: 5 years after unopened container
Freeze/Thaw: Three cycles
Shipping Weight: 10 lb.
| SKU | DRYLOK-28613 |
|---|---|
| Weight | 10.000000 |
| Manufacturer | DRYLOK |
Write Your Own Review
Payment Plan:
The items you need are well within your reach. ShopSSLTT has the premium products you want at affordable prices and with our shop now pay later payment plans we make them accessible to all. Lear more on the following links
Payment plan Details : You can now finance your purchases with flexible payment plans. Click here to learn how.
Requirements: Before you apply for the plan make sure you have all the required documents, click here to see the list of documents required.
